Eastwood Chassis Black Gloss Aerosol 14 oz Resists Corrosion Chips and Scratches

Description

DETAILS
Eastwood’s Original Chassis Black Gloss is the perfect coating at the perfect price for any under car component.
Resists corrosion, chips and scratches
Resists brake fluid, fuel, solvents, UV
Matches OEM finish
Apply multiple coats without lifting
85% + Gloss Level
Choose 14-oz. aerosol or 1-qt. can
The 85% gloss finish creates a custom look with superior protection on suspension parts and frame. Tough, long-lasting formula resists chips and corrosion, so it's ideal for the value-conscious enthusiast who wants a factory-fresh look while staying within a budget.
Note:
This paint can not be applied over top of self-etching primers.
ABOUT EASTWOOD ORIGINAL CHASSIS BLACK GLOSS FINISH
Chassis Black Gloss applies smoothly over bare metal, Eastwood Rust Encapsulator, or Eastwood Chassis Black Primer. (Not for use over self-etching primers.) High-solids content, pre-thinned to sprayable consistency. Withstands temperatures up to 300°F. 30-day Eastwood warranty.
CONTENTS
Choose from the following:
10000Z is the 14-oz. aerosol can of Chassis Black Gloss with 8-sq.-ft. coverage
10354ZP is the 1-quart can of Chassis Black Gloss with 40-sq.-ft. coverage
Both also available in 12-packs.
APPLICATION
Eastwood’s Original Chassis Black is formulated to provide you with the right sheen, durability and long-lasting great looks. Its 85% gloss level is correct for many factory restorations or use in a custom application. Ideal for frames, suspension components, roll bars, differentials, floor boards and much more. Fortified with high solids and epoxy, Chassis Black resists chips, UV rays and high temperatures up to 300°F.
Directions
READ ALL INSTRUCTIONS BEFORE USING
Ensure surface is clean and free of debris, greases and oils. Use Eastwood’s Chassis Kleen™ and/or PRE™ to remove stubborn grime and prepare the surface for painting.
Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320-grit abrasive. For the best adhesion apply Eastwood’s Extreme Chassis Black Primer prior to painting. DO NOT USE OVER SELF-ETCHING PRIMERS. Test compatibility on a non-descript area before painting.
SHAKE CAN VIGOROUSLY FOR AT LEAST ONE MINUTE. Apply to surface with steady strokes about 8-10 inches from surface. It’s better to apply several light coats than one heavy coat. Ideal conditions are 70°F to 90°F at 50% (or less) humidity. Conditions will affect dry times.
Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat. Full cure time is 24-36 hours, depending on conditions. If re-coating after 36 hours, scuff surface with 320-grit abrasive.
SAFETY
Always wear eye, skin and respiratory protection when painting. Follow label directions and consult MSDS for specific warnings.
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65
WARNING
- Cancer and Reproductive Harm -
www.P65Warnings.ca.gov